Skytrak 6036 Service Manual Manuel d'utilisateur télécharger pdf (Page 112)

Axles, Drive Shafts, Wheels and Tires

5-6

6036, 6042, 8042, 10042, 10054

5.5 GENERAL INFORMATION

Note: To help ensure optimum performance, the drive

shaft assemblies are specially balanced as a unit at the

factory. When servicing any flange yoke, slip yoke or

drive shaft tube, order a complete assembly if

components are bent or damaged. Refer to the

appropriate parts manual for ordering information.

Before performing any inspection, maintenance or

service operation, thoroughly clean the unit. The axles

and drive shafts should be checked and repaired only by

experienced service technicians who are aware of all

safety instructions and particular component features.

Use suitable products to thoroughly clean all

disassembled mechanical parts to help prevent personal

injury to the worker and prevent damage to the parts.

Carefully inspect the integrity of all moving parts

(bearings, yokes, tubes, gears, shafts, etc.) and fasteners

(nuts, bolts, washers, etc.) as they are subject to major

stress and wear. Always replace any damaged, worn,

cracked, seized or otherwise improper parts that could

affect the safe and proper functioning of the machine,

axles and drive shafts.

5.6 AXLE ASSEMBLIES

5.6.1 Axle Serial Number Plate

The front axle serial number plate is located on a

mounting pad on the inboard portion of the right beam

trumpet. The rear axle serial number plate is located on a

mounting pad on the inboard portion of the left trumpet.

Information on the serial number plate is required in

correspondence regarding the axle.

Supply information from the axle serial number plate

when communicating about an axle assembly or axle

components.

5.6.2 Axle Specifications

General axle specifications are found in Section 2.5,

“Fluid Specifications.”

5.6.3 Axle Internal Service

Detailed axle service instructions (covering the axle,

differential, brakes and wheel-end safety, repair,

disassembly, reassembly, adjustment and

troubleshooting information) are provided in the

appropriate Axle Repair Manual.

WARNING

DO NOT service the machine without following all

safety precautions as outlined in Section 1, “Safety

Practices,” of this manual.

Machine ZF Model Axle P/N

6036,6042 MS-T 3045 II Both 31200694

8042,10042 &

10054

MS-T 3060 II Front 31200695

8042 MS-T 3045 II Rear 31200694

10042,10054 MS-T 3055 II Rear 31200694

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 275 276

Commentaires sur ces manuels

Pas de commentaire

Skytrak 6036 Service Manual Manuel d'utilisateur Page 112

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Skytrak 6036 Service Manual